Terminal blocks used as a lampholder in fluorescent lamps.
- Moulding: polyamide 6, natural colour, V2 (according to UL94).
- Insert: nickel-plated brass.
- Screws: zinc-plated steel. Metric thread.
- Contact holes are at the same distance of fluorescent lamp pins.
- Type F6-C has a housing to locate terminal.
- Type F6-CPE has a housing to locate terminal and elevated base that acts as standard lampholder.
3 available versions which are compatible with T8 tubes.
Connection capacity:
- Solid cable: 4 mm² / 1,5 mm²
- Flexible cable: 4 mm² / 1,5 mm²
Voltage: 250 V
Temperature: 110ºC
Constructive:
- Are specially made to act both as lampholder and connection unit of fluorescent lamps.
- Contact holes are at the same distance of fluorecent lamp pins.
- Captive screw.
- Raised screw, providing an easier insertion of the conductor.
- Halogen free products.
Intensity: 17,5 A
Tightening torque: 0,5 Nm
Metrics: M 3
Connection capacity:
- Solid cable: 4 mm² / 1,5 mm²
- Flexible cable: 4 mm² / 1,5 mm²
Voltage: 250 V
Temperature: 110ºC
Constructive:
- Are specially made to act both as lampholder and connection unit of fluorescent lamps.
- Contact holes are at the same distance of fluorecent lamp pins.
- Captive screw.
- Raised screw, providing an easier insertion of the conductor.
- Halogen free products.
Intensity: 17,5 A
Tightening torque: 0,5 Nm
Metrics: M 3
Connection capacity:
- Solid cable: 4 mm² / 1,5 mm²
- Flexible cable: 4 mm² / 1,5 mm²
Voltage: 250 V
Temperature: 110ºC
Constructive:
- Are specially made to act both as lampholder and connection unit of fluorescent lamps.
- Contact holes are at the same distance of fluorecent lamp pins.
- Captive screw.
- Raised screw, providing an easier insertion of the conductor.
- Halogen free products.
Intensity: 17,5 A
Tightening torque: 0,5 Nm
Metrics: M 3